Toyota Cressida and Van 1983-1990

Windshield Wiper Blade

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 When removing the wiper arm, lift the nut cover into the upright position



Click image to see an enlarged view

Fig. Fig. 2 Remove the mounting nut from the wiper arm ...



Click image to see an enlarged view

Fig. Fig. 3 ... then lift the arm up off the windshield



Click image to see an enlarged view

Fig. Fig. 4 To remove the wiper blade from the wiper arm, remove the mounting screws



Click image to see an enlarged view

Fig. Fig. 5 Lift the blade off the arm and replace as necessary

Wiper blade element replacement is covered in .

Toyota has two types of wiper blades. The screw-on type and the clip-on type.

To remove the clip-on type, lift up the wiper arm from the windshield. Lift up on the spring release tab on the wiper blade-to-wiper arm connector, then pull the blade assembly off the wiper arm.

To remove the screw-on type, lift up the wiper arm from the windshield. Loosen and remove the two screws retaining the blade to the arm, then lift the blade assembly off the wiper arm.

 
label.common.footer.alt.autozoneLogo