Toyota Cressida and Van 1983-1990

Wiper Linkage

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the wiper motor assembly.
  4.  
  5. Remove the wiper arms by removing their retaining nuts and working them off their shafts.
  6.  
  7. Remove the wiper shaft nuts and spacers. Push the shafts down into the body cavity. Pull the linkage out of the cavity through the wiper motor hole.
  8.  
  9. To install reverse the removal procedure. Install the wiper motor assembly. Connect the negative battery cable and check the operation of the wiper motor.
  10.  

 
label.common.footer.alt.autozoneLogo