Toyota Highlander 6 2001-06

Pinion Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Drain the differential oil.
  4.  
  5. Remove or disconnect the following:

    Exhaust pipe
     
    Driveshaft by matchmarking it
     
    Companion flange nut, by loosen the staked portion
     
    Companion flange, using a screw-type extractor
     
    Oil seal, using an extractor
     
    Slinger
     
    Front bearing
     
    Spacer
     

  6.  

To install:

  1. Install or connect the following
    NOTE
    Seal installation depth: 2.0mm +/- 0.3mm



    New spacer
     
    Bearing
     
    Slinger
     
    New seal
     



    Companion flange
     
    New nut. Coat the threads with clean differential oil. Torque the nut to 80 ft. lbs. (108 Nm).
     

  2.  
  3. The remainder of installation is the reverse of removal.
  4.  

Highlander Hybrid
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the differential oil.
  4.  
  5. Remove or disconnect the following:

    Exhaust pipe
     
    Driveshaft by matchmarking it
     
    Companion flange nut, by loosen the staked portion
     
    Companion flange, using a screw-type extractor
     
    Oil seal, using an extractor
     
    Slinger
     
    Front bearing
     
    Spacer
     

  6.  

To install:

  1. Install or connect the following
    NOTE
    Seal installation depth: 2.0mm +/- 0.3mm



    New spacer
     
    Bearing
     
    Slinger
     
    New seal
     



    Companion flange
     
    New nut. Coat the threads with clean differential oil. Torque the nut to 80 ft. lbs. (108Nm).
     

  2.  
  3. The remainder of installation is the reverse of removal.
  4.  

 
label.common.footer.alt.autozoneLogo