Toyota Highlander Hybrid 6 2005-06

Door Glass & Regulator 2

Print

Power Windows



Removal & Installation
Switch
Front
  1. Disconnect the negative battery cable.
  2.  
  3. Remove power window regulator/door lock master switch as follows:
    1. Using a suitable prytool (or a screwdriver with its tip taped to prevent damage), carefully disengage the hook, remove the power window regulator master switch.
    2.  
    3. Disconnect the electrical connector.

      Click image to see an enlarged view

      Fig. Using a suitable prytool (or a screwdriver with it-s tip taped to prevent damage), carefully disengage the hook, remove the power window regulator master switch

    4.  

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Highlander Hybrid
  1. Disconnect the negative battery cable.
  2.  
  3. Remove power window regulator/door lock master switch as follows:
    1. Using a suitable prytool (or a screwdriver with its tip taped to prevent damage), carefully disengage the hook, remove the power window regulator master switch.
    2.  
    3. Disconnect the electrical connector.

      Click image to see an enlarged view

      Fig. Using a suitable prytool (or a screwdriver with it-s tip taped to prevent damage), carefully disengage the hook, remove the power window regulator master switch

    4.  

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  
  7. Perform the initialization procedure, as outlined in the Chassis Electrical System.
  8.  

Rear
  1. Disconnect the negative battery cable.
  2.  
  3. Remove power window regulator/door lock master switch as follows:
    1. Using a suitable prytool (or a screwdriver with its tip taped to prevent damage), carefully disengage the hook, then remove the power window switch.
    2.  
    3. Disconnect the electrical connector.
    4.  

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Highlander Hybrid
  1. Disconnect the negative battery cable.
  2.  
  3. Remove power window regulator/door lock master switch as follows:
    1. Using a suitable prytool (or a screwdriver with its tip taped to prevent damage), carefully disengage the hook, then remove the power window switch.
    2.  
    3. Disconnect the electrical connector.
    4.  

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  
  7. Perform the initialization procedure, as outlined in the Chassis Electrical System.
  8.  

 
label.common.footer.alt.autozoneLogo