Toyota Highlander Hybrid 6 2005-06

Starter

Print

Removal & Installation



2.4L Engine
  1. Remove the battery.
  2.  
  3. Remove the battery tray.
  4.  
  5. Disconnect the starter wiring.
  6.  
  7. Remove the mounting bolts.
  8.  
  9. Lift out the starter.
  10.  
  11. Installation is the reverse of removal. Torque the mounting bolts to 27 ft. lbs. (37 Nm).

    Click image to see an enlarged view

    Fig. Starter mounting-2.4L Highlander

  12.  

3.3L Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the battery.
  4.  
  5. Remove the battery tray.
  6.  
  7. Remove the wiring from the starter.
  8.  
  9. Remove the 2 bolts and lower the starter.
  10.  
  11. Installation is the reverse of removal. Torque the starter bolts to 27 ft. lbs. (37 Nm).

    Click image to see an enlarged view

    Fig. Starter mounting bolt locations-3.3L engine

  12.  

 
label.common.footer.alt.autozoneLogo