Toyota Land Cruiser, Sequoia 6 2001-06

Exhaust Manifold

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Attach a hoist to the engine lifting eyes.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Heated Oxygen (HO2S) sensor connectors
     
    Exhaust manifold heat shield
     
    Exhaust front pipe
     
    Motor mount
     
    Motor mount bracket
     
    Exhaust manifold
     

  6.  

To install:


NOTE
Use new exhaust manifold nuts for assembly.

  1. Install or connect the following:

    Exhaust manifold. Tighten the nuts to 32 ft. lbs. (44 Nm).
     
    Motor mount bracket. Tighten the bolts to 27 ft. lbs. (36 Nm).
     
    Motor mount. Tighten the fasteners to 22 ft. lbs. (30 Nm).
     
    Exhaust front pipe. Tighten the nuts to 46 ft. lbs. (62 Nm).
     
    Exhaust manifold heat shield
     
    HO2S sensor connectors
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Attach a hoist to the engine lifting eyes.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Heated Oxygen (HO 2 S) sensor connectors
     
    Exhaust manifold heat shield
     
    Exhaust front pipe
     
    Motor mount
     
    Motor mount bracket
     
    Exhaust manifold
     

  6.  

To install:


NOTE
Use new exhaust manifold nuts for assembly.

  1. Install or connect the following:

    Exhaust manifold. Tighten the nuts to 32 ft. lbs. (44 Nm).
     
    Motor mount bracket. Tighten the bolts to 27 ft. lbs. (36 Nm).
     
    Motor mount. Tighten the fasteners to 22 ft. lbs. (30 Nm).
     
    Exhaust front pipe. Tighten the nuts to 46 ft. lbs. (62 Nm).
     
    Exhaust manifold heat shield
     
    HO 2 S sensor connectors
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo