Toyota Land Cruiser, Sequoia 6 2001-06

Rocker Arm (Valve) Cover

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove battery clamp cover.
  4.  
  5. Remove throttle body cover.
  6.  
  7. Remove air cleaner and intake air connector assembly.
  8.  
  9. Remove the upper timing belt covers.
  10.  
  11. Remove ignition coils.
  12.  
  13. Remove the 9 bolts, seal washers and the right cylinder head cover.
  14.  
  15. Remove the oil dipstick for the transmission.
  16.  
  17. Disconnect the PCV hose.
  18.  
  19. Disconnect the engine wire clamp from the wire bracket on the cylinder head cover.
  20.  
  21. Remove the 9 bolts, 9 seal washers and the left cylinder head cover.
  22.  

To install:

  1. Install the left cylinder head cover.
  2.  
  3. Connect the engine wire clamp to the wire bracket on the cylinder head cover.
  4.  
  5. Connect the PCV hose.
  6.  
  7. Replace the oil dipstick for the transmission.
  8.  
  9. Install the right cylinder head cover.
  10.  
  11. Install the ignition coils.
  12.  
  13. Install the upper timing belt covers.
  14.  
  15. Install the air cleaner and intake air connector assembly.
  16.  
  17. Install the throttle body cover.
  18.  
  19. Install the battery clamp cover.
  20.  

 
label.common.footer.alt.autozoneLogo