Toyota Land Cruiser, Sequoia 6 2001-06

Fuel Pump

Print

Removal & Installation





Click image to see an enlarged view

Fig. Exploded view of the fuel pump and related components- Land Cruiser

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Rear seats
     
    Door sill trim plates
     
    Carpeting and floor mats
     
    Access panel
     
    Fuel pump harness connector
     
    Fuel lines
     
    Fuel pump module
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump module. Tighten the bolts to 35 inch lbs. (4 Nm).
     
    Fuel lines
     
    Fuel pump harness connector
     
    Access panel
     
    Carpeting and floor mats
     
    Door sill trim plates
     
    Rear seats
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  



Click image to see an enlarged view

Fig. Exploded view of the fuel pump and related components-Sequoia

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel tank
     
    Fuel pump harness connector
     
    Fuel lines
     
    Fuel pump module
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump module. Tighten the bolts to 35 inch lbs. (4 Nm).
     
    Fuel lines
     
    Fuel pump harness connector
     
    Fuel tank
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo