Toyota Matrix 2003-06

Ignition Switch

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the trim covers from the steering column.
  4.  
  5. Disconnect the ignition switch electrical connector.
  6.  
  7. Remove the 2 screws and the ignition switch.
  8.  

To install:

  1. Install the ignition switch and the screws.
  2.  
  3. Connect the ignition switch electrical connector.
  4.  
  5. Install the trim covers to the steering column.
  6.  

 
label.common.footer.alt.autozoneLogo