Toyota Matrix 2003-06

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove some fluid from the reservoir with a suction pump.
  4.  
  5. Remove or disconnect the following:

    Rear wheels
     
    Clip and both anti-rattle springs
     
    Two pad guide pins
     
    Pads with the shims
     

  6.  

To Install:

  1. Compress the caliper piston using a C-clamp or other suitable tool.
  2.  
  3. Install or connect the following:

    New anti-squeal shims, apply disc brake grease to the inside of the shim before installation
     
    Inner pad with the wear indicator facing upwards
     
    Outer pad
     
    Two pad guide pins
     
    Anti-rattle springs and the clip
     

  4.  
  5. Fill the reservoir with fluid and bleed the brake system. Adjust the parking brake if necessary.

    Rear wheels
     

  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove some fluid from the reservoir with a suction pump.
  4.  
  5. Remove or disconnect the following:

    Rear wheels
     
    Clip and both anti-rattle springs
     
    Two pad guide pins
     
    Pads with the shims
     

  6.  

To Install:

  1. Compress the caliper piston using a C-clamp or other suitable tool.
  2.  
  3. Install or connect the following:

    New anti-squeal shims, apply disc brake grease to the inside of the shim before installation
     
    Inner pad with the wear indicator facing upwards
     
    Outer pad
     
    Two pad guide pins
     
    Anti-rattle springs and the clip
     

  4.  
  5. Fill the reservoir with fluid and bleed the brake system. Adjust the parking brake if necessary.

    Rear wheels
     

  6.  

 
label.common.footer.alt.autozoneLogo