Toyota Matrix 2003-06

Upper Control Arms

Print

Removal & Installation



All Wheel Drive
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. Wait at least 90 seconds before proceeding
     
    Rear wheel
     
    Exhaust pipe
     
    Propeller shaft with center bearing shaft
     
    Rear stabilizer links
     
    Rear hub nuts
     
    Rear brake drum
     
    Speed sensor
     
    Front brake shoe
     
    Parking brake shoe strut set
     
    Rear brake shoe
     
    Parking brake cables
     
    Rear brake hoses
     
    Separate the rear suspension arms
     
    Separate the upper control arm
     
    Rear drive axle assembly
     
    Rear strut nut and bolt
     
    Rear strut
     
    Rear suspension arm
     
    Rear suspension member
     
    Upper control arm assembly. Matchmark the camber adjust cams and rear suspension member prior to removal.
     

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. Wait at least 90 seconds before proceeding
     
    Rear wheel
     
    Exhaust pipe
     
    Propeller shaft with center bearing shaft
     
    Rear stabilizer links
     
    Rear hub nuts
     
    Rear brake drum
     
    Speed sensor
     
    Front brake shoe
     
    Parking brake shoe strut set
     
    Rear brake shoe
     
    Parking brake cables
     
    Rear brake hoses
     
    Separate the rear suspension arms
     
    Separate the upper control arm
     
    Rear drive axle assembly
     
    Rear strut nut and bolt
     
    Rear strut
     
    Rear suspension arm
     
    Rear suspension member
     
    Upper control arm assembly. Matchmark the camber adjust cams and rear suspension member prior to removal.
     

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. Wait at least 90 seconds before proceeding
     
    Rear wheel
     
    Exhaust pipe
     
    Propeller shaft with center bearing shaft
     
    Rear stabilizer links
     
    Rear hub nuts
     
    Rear brake drum
     
    Speed sensor
     
    Front brake shoe
     
    Parking brake shoe strut set
     
    Rear brake shoe
     
    Parking brake cables
     
    Rear brake hoses
     
    Separate the rear suspension arms
     
    Separate the upper control arm
     
    Rear drive axle assembly
     
    Rear strut nut and bolt
     
    Rear strut
     
    Rear suspension arm
     
    Rear suspension member
     
    Upper control arm assembly. Matchmark the camber adjust cams and rear suspension member prior to removal.
     

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo