Toyota Matrix 2003-06

Wheel Bearings

Print

Removal & Installation





Click image to see an enlarged view

Fig. Exploded view of the hub and wheel bearing assembly

Exploded view of the hub and wheel bearing assembly
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
     
    Wheel
     
    Brake drum or rotor
     
    With ABS brakes, ABS wheel speed sensor or skid control sensor, as applicable
     
    4 hub retaining bolts
     
    Hub
     

  4.  

To install:

  1. Install or connect the following:

    Hub to the knuckle. Tighten the bolts to 45 ft. lbs. (61 Nm).
     
    ABS wheel speed or skid control sensor, if equipped
     
    Brake drum or rotor
     
    Wheel
     
    Negative battery cable
     

  2.  
  3. Check and adjust the alignment, if needed.
  4.  



Click image to see an enlarged view

Fig. Exploded view of the hub and wheel bearing assembly

Exploded view of the hub and wheel bearing assembly
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
     
    Wheel
     
    Brake drum or rotor
     
    With ABS brakes, ABS wheel speed sensor or skid control sensor, as applicable
     
    4 hub retaining bolts
     
    Hub
     

  4.  

To install:

  1. Install or connect the following:

    Hub to the knuckle. Tighten the bolts to 45 ft. lbs. (61 Nm).
     
    ABS wheel speed or skid control sensor, if equipped
     
    Brake drum or rotor
     
    Wheel
     
    Negative battery cable
     

  2.  
  3. Check and adjust the alignment, if needed.
  4.  

 
label.common.footer.alt.autozoneLogo