Toyota Pick-ups/Land Cruiser/4Runner 1970-1988

Receiver/Drier

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Recover refrigerant (discharge system) from refrigeration system.
  4.  
  5. Disconnect lines from the receiver. Cap open fittings immediately.
  6.  
  7. Remove the receiver from the receiver holder assembly.
  8.  

To install:
  1. Install receiver in receiver holder assembly. Reconnect lines to the receiver. Reconnect the negative battery cable.
  2.  
  3. If receiver assembly was replaced, add 0.7 fl. oz. of compressor oil.
  4.  
  5. Evacuate, charge and test refrigerant system. Check system for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo