Toyota Pick-ups/Land Cruiser/4Runner 1970-1988

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



  1. Position the shift lever in neutral.
  2.  
  3. Raise the truck and support it on safety stands.
  4.  
  5. Disconnect the electrical connector at the switch.
  6.  
  7. Unscrew the back-up light switch from the extension housing.
  8.  

To install:
  1. Screw the new switch into the housing and tighten it to 60 inch lbs.
  2.  
  3. Connect the wire and lower the truck.
  4.  

 
label.common.footer.alt.autozoneLogo