Toyota Pick-ups/Land Cruiser/4Runner 1970-1988

Door Locks

Print

REMOVAL & INSTALLATION



  1. Remove the door trim panel and the service hole cover.
  2.  
  3. Disconnect the:
    1. inside locking control link
    2.  
    3. outside opening control link
    4.  
    5. outside locking control link.
    6.  

  4.  
  5. Remove the door lock cylinder with a pair of pliers.
  6.  
  7. Install the lock cylinder and connect the links.
  8.  
  9. Loosen the mounting screws for the inside door handle and push it forward until resistance is felt. Move it backwards slightly and tighten the mounting screws.
  10.  
  11. Disconnect the control link form the outside door handle about 1mm from rest. Turn the adjuster on the link until it will fit into the mounting hole of the raised handle.
  12.  

Door Lock Cylinder
  1. Place the window in the UP position.
  2.  
  3. Remove the trim panel and watershield.
  4.  
  5. Disconnect the actuating rod from the lock control link clip.
  6.  
  7. Slide the retainer away from the lock cylinder.
  8.  
  9. Pull the cylinder from the door.
  10.  
  11. Installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo