Toyota Pick-ups/Land Cruiser/4Runner 1989-1996

Air Inlet Servomotor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the glove box compartment door.
  4.  
  5. Set the damper to the RECIRC position.
  6.  
  7. Disconnect the air inlet servomotor wiring.
  8.  
  9. Disconnect the linkage from the air inlet servomotor.
  10.  
  11. Remove the mounting screws and the air inlet servomotor.
  12.  

To install:
  1. Install the air inlet servomotor, tighten the mounting screws until snug.
  2.  
  3. Connect the linkage to the air inlet servomotor.
  4.  
  5. Attach the air inlet servomotor harness.
  6.  
  7. Install the glove compartment door.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo