Toyota Pick-ups/Land Cruiser/4Runner 1989-1996

Blower Motor

Print

REMOVAL & INSTALLATION



Land Cruiser
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the right front seat.
  4.  
  5. Separate the connectors from the blower motor and the rear heater relay.
  6.  
  7. Remove the bolt and the rear heater relay.
  8.  
  9. Remove the screw retaining the side cover.
  10.  
  11. Remove the bolt and 7 screws, then the upper cover with the motor. Remove the screw retaining the motor from the cover.
  12.  
  13. Remove the nut holding the cage to the motor, then separate the cage from the unit.
  14.  

To install:
  1. Attach the cage to the motor with the mounting nut.
  2.  
  3. Secure the blower motor to the upper cover and install it into the vehicle.
  4.  
  5. Attach the side cover. Install the rear heater relay.
  6.  
  7. Install the harness connection to the motor.
  8.  
  9. Check all connections are secure, then install the right front seat.
  10.  
  11. Connect the negative battery cable.
  12.  

4Runner
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear heater unit from the vehicle.
  4.  
  5. Remove the wire harness clamps.
  6.  
  7. Remove the screws and clamp securing the case halves.
  8.  
  9. Remove the motor attaching screws, then lift out the motor.
  10.  
  11. Remove the nut holding the cage to the motor, then separate the cage from the unit.
  12.  

To install:
  1. Attach the cage to the motor with the mounting nut.
  2.  
  3. Install the motor into the heater case.
  4.  
  5. Install the heater cases together, then attach the wire harness clamps.
  6.  
  7. Install the rear heater unit into the vehicle.
  8.  
  9. Connect the negative battery cable.
  10.  
  11. Check the operation of the system.
  12.  

 
label.common.footer.alt.autozoneLogo