Toyota Pick-ups/Land Cruiser/4Runner 1989-1996
Brake Light Switch
REMOVAL & INSTALLATION
Disconnect the electrical harness at the switch.
Remove the locknut (closest to the pedal). Remove the switch from the brake pedal.
Insert the new switch and loosely install the locknut. Adjust the switch so that plunger at the tip of the switch is held in by the pedal in its at-rest position. Remember that the pedal holds the switch off; the brake lamps come on when the pedal moves away from the switch.
Once positioned, tighten the locknut and connect the wiring. Check the switch function by pressing the pedal. Have an assistant observe the brake lamps for proper operation.