Toyota Pick-ups/Land Cruiser/4Runner 1989-1996

Blower Switch

Print

REMOVAL & INSTALLATION



  1. Remove the heater control assembly.
  2.  
  3. Remove the illumination light from the heater control assembly.
  4.  
  5. Using a flat-bladded tool, pry loose the clip and push out the blower speed control switch to the rear of the heater control assembly.
  6.  

To install:
  1. Push the switch into the heater control assembly.
  2.  
  3. Attach the illumination light, then install the control assembly.
  4.  

 
label.common.footer.alt.autozoneLogo