Toyota Pick-ups/Land Cruiser/4Runner 1989-1996

Washer Fluid Reservoir

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Unbolt the washer reservoir from the upper radiator support.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Unbolt the reservoir bracket from the upper radiator support

  1. Lift the unit from the engine compartment, then slide the hose from the unit.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Lift the unit from the engine compartment, then slide the hose from the unit

  1. Unhook the wiring harness for the pump from the side of the reservoir.
  2.  
  3. Disconnect the wiring harness from the pump, then remove the pump from the reservoir. Check the condition of the grommet that the pump sits into.
  4.  

To install:
  1. Install the pump into the reservoir, ensure the grommet is in good condition.
  2.  
  3. Attach the wiring to the pump, then run the hose for the pump along the side of the reservoir.
  4.  
  5. Seat the reservoir into the engine compartment, secure with the mounting bolt.
  6.  

 
label.common.footer.alt.autozoneLogo