Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Actuator

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. ABS actuatorTacoma TRD



Click image to see an enlarged view

Fig. Exploded view of the ABS actuator assembly



Click image to see an enlarged view

Fig. View of the ABS actuator as it is mounted on the ABS ECU



Click image to see an enlarged view

Fig. Detach the wiring harness connector from the ABS actuator by pulling the release bar



Click image to see an enlarged view

Fig. Remove the brake lines from the ABS actuator

  1. Disconnect and plug the brake lines.
  2.  
  3. Unplug the ABS connectors from the actuator.
  4.  
  5. Remove the bolts and nuts to release the assembly from the vehicle.
  6.  
  7. Unbolt the unit from the bracket.
  8.  

To install:

  1. Attach the ABS actuator to the bracket, tighten the mounting nuts to 48 inch lbs. (5 Nm).
  2.  
  3. Install the actuator with bracket to the vehicle; tighten the mounting bolts to 14 ft. lbs. (19 Nm).
  4.  
  5. Attach the brake lines to the actuator, tighten them to 11 ft. lbs. (15 Nm).
  6.  



Click image to see an enlarged view

Fig.

 
label.common.footer.alt.autozoneLogo