Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Air Inlet Servomotor

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Air outlet servo motor

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the necessary glove box compartment components.
  4.  
  5. Set the damper to the RECIRC position.
  6.  
  7. Disconnect the air inlet servomotor wiring.
  8.  
  9. Disconnect the linkage from the air inlet servomotor.
  10.  
  11. Remove the mounting screws and the air inlet servomotor.
  12.  

To install:

  1. Install the air inlet servomotor; tighten the mounting screws until snug.
  2.  
  3. Connect the linkage to the air inlet servomotor.
  4.  
  5. Attach the air inlet servomotor harness.
  6.  
  7. Install the glove compartment door.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo