Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Blower Switch

Print

REMOVAL & INSTALLATION



  1. Remove the heater control assembly.
  2.  
  3. Remove the illumination light from the heater control assembly.
  4.  
  5. Using a flat-bladed tool, pry the clip loose, and push out the blower speed control switch to the rear of the heater control assembly.
  6.  

To install:

  1. Push the switch into the heater control assembly.
  2.  
  3. Attach the illumination light, then install the control assembly.
  4.  

 
label.common.footer.alt.autozoneLogo