Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Rear Blower Resistor

Print

REMOVAL & INSTALLATION



Land Cruiser
  1. Remove the right front seat.
  2.  
  3. Disconnect the resistor wiring harness.
  4.  
  5. Remove the mounting screws and the resistor.
  6.  

To install:

  1. Install the resistor, and then attach the harness wiring to the unit.
  2.  
  3. Install the front seat.
  4.  

4Runner
  1. Remove the console box.
  2.  
  3. Disconnect the wiring harness from the resistor.
  4.  
  5. Remove the mounting screws from the resistor, then the resistor.
  6.  

To install:

  1. Install the resistor, and then attach the harness wiring to the unit.
  2.  
  3. Install the console box.
  4.  

 
label.common.footer.alt.autozoneLogo