Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Anti-Sway (Stabilizer) Bar

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Rear stabilizer bar componentsLand Cruiser shown, others similar



Click image to see an enlarged view

Fig. Stabilizer bar end link locations



Click image to see an enlarged view

Fig. Stabilizer bar mounting locations

  1. Remove the rear wheels.
  2.  
  3. Loosen and remove the nuts and bolts to the left and right anti-sway bar end links.
  4.  
  5. Remove the anti-sway bar to rear axle housing mount bolts.
  6.  
  7. Lower the anti-sway bar.
  8.  
  9. Installation is the reverse of removal. Tighten the anti-way bar mounting brackets and end link bolts to 13 ft. lbs. (18 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo