Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00

Upper and Lower Control Arms

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Upper and lower control arm locations



Click image to see an enlarged view

Fig. Upper control arm bolts



Click image to see an enlarged view

Fig. Lower control arm bolts

  1. Remove the rear wheel.
  2.  
  3. Support the rear axle with jack stands.
  4.  
  5. Detach the ABS speed sensor wiring harness.
  6.  
  7. Remove the bolt and then detach the heat insulator.
  8.  
  9. Loosen and remove the nuts, washers, and bolts to the lower control arm.
  10.  
  11. Remove the lower control arm.
  12.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Torque the control arm mounting bolts to 111 ft. lbs. (150 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo