Toyota Previa 1991-1997 Repair Information

Extension Housing Seal

Print

REMOVAL & INSTALLATION



  1. Remove the driveshaft.
  2.  
  3. Using a seal puller, extract the seal from the extension housing.
  4.  
  5. Coat the new seal with transmission fluid. Preferable clean fresh fluid.
  6.  
  7. Using a seal driver, tap the seal into position as far as it will go. The lip of the seal should be flush with the extension housing.
  8.  
  9. Install the driveshaft.
  10.  

 
label.common.footer.alt.autozoneLogo