Toyota Previa 1991-1997 Repair Information

Engine Fan

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Remove the air duct.
  2.  
  3. Remove the No. 2 fan shroud.
  4.  
  5. Stretch the drive belt down and loosen the four nuts for the fan and clutch.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The fan blade is attached to the clutch with nuts, not all shown

  1. Remove the nuts and the fan clutch with the cooling fan.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Once the nuts are removed, the blade comes off easily from the studs

To install:
  1. Install the fan clutch with the fan to the engine.
  2.  
  3. Install the fan nuts.
  4.  
  5. While retaining the drive belt, tighten the nuts to 10 ft. lbs. (13 Nm).
  6.  
  7. Install the No. 2 fan shroud.
  8.  
  9. Install the air duct.
  10.  

 
label.common.footer.alt.autozoneLogo