Toyota Previa 1991-1997 Repair Information

Control Panel

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the console box located below the ashtray.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Press on the sides of the box while pulling outwards to extract the console

  1. Remove the ashtray retaining screws and disconnect the wiring.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Remove the four screws and retainer to extract the ash tray

  1. Pull off the knobs prior to control panel removal.
  2.  
  3. Carefully pull out the center cluster finish panel.
  4.  
  5. Remove the control panel by removing the 4 screws.
  6.  



Click image to see an enlarged view

Fig. Fig. 3: Remove the four screws surrounding the control assembly and extract the unit from the dash

To install:
  1. Installation is the reverse of removal. Use care when snapping back together plastic components, if so equipped.
  2.  

 
label.common.footer.alt.autozoneLogo