Toyota Previa 1991-1997 Repair Information

Extension Housing Seal

Print

REMOVAL & INSTALLATION



  1. Using a hammer and chisel, loosen the staked nut part of the nut.
  2.  
  3. With a wrench and retaining tool, hold the flange and remove the flange lock nut.
  4.  
  5. Remove the companion flange.
  6.  
  7. Using a puller, remove the dust deflector from the extension housing.
  8.  
  9. Tape the end of a flat bladed pry tool, then carefully pry the seal from the housing.
  10.  

To install:
  1. Coat the lip of the oil seal with Multi-purpose grease.
  2.  
  3. Install a new dust deflector.
  4.  
  5. With a seal installer and hammer, carefully and evenly, drive the new seal into position. Seal drive in depth is 0-0.039 inch (0-1.0mm).
  6.  
  7. Install the companion flange and tighten the lock nut to 90 ft. lbs. (123 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo