Toyota RAV4 2000-05

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the clutch line from the slave cylinder (located on the side of the transaxle). Plug the line to prevent fluid from escaping.
  4.  
  5. Remove the 2 nuts, then remove the cylinder from the vehicle.

    Click image to see an enlarged view

    Fig. Clutch slave cylinder mounting bolts

  6.  
  7. Installation is the reverse of removal. Tighten the mounting bolts to 9 ft. lbs. (12 Nm). Bleed the hydraulic clutch system.
  8.  

 
label.common.footer.alt.autozoneLogo