Toyota RAV4 2000-05

Electric Engine Fan

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
    NOTE
    Wait at least 90 seconds after disconnecting the negative battery cable before starting any repair work to prevent air bag and seat belt pretensioner activation.

  4.  
  5. Remove the radiator.
  6.  
  7. Remove the fan(s).
  8.  

To install:

  1. Install any part removed in reverse order of removal. Tighten the fan bolts until snug. Fill the engine with the proper type and amount of coolant.

    Click image to see an enlarged view

    Fig. Typical radiator fan mounting bolt locations

  2.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
    NOTE
    Wait at least 90 seconds after disconnecting the negative battery cable before starting any repair work to prevent air bag and seat belt pretensioner activation.

  4.  
  5. Remove the engine under covers.
  6.  
  7. Drain the engine coolant.
  8.  
  9. Remove the radiator coolant reservoir.
  10.  
  11. Unplug the connectors, then remove the bolts securing the fan(s). Remove the fans from the vehicle.
  12.  

To install:

  1. Install any part removed in reverse order of removal. Tighten the fan bolts until snug. Fill the engine with the proper type and amount of coolant.
  2.  

 
label.common.footer.alt.autozoneLogo