Toyota RAV4 2000-05

Flywheel/Flexplate & Ring Gear

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transaxle.
  4.  
  5. On manual transmissions, remove the clutch.
  6.  
  7. Remove the bolts securing the flywheel (manual transaxles) or drive plate (automatic transaxles).
  8.  

To install:

  1. Installation is the reverse of removal. Observe the following:
    1. On 2000 automatic transaxles, tighten the drive plate bolts to 61 ft. lbs. (83 Nm).
    2.  
    3. On 2000 manual transaxles, tighten the flywheel bolts to 65 ft. lbs. (88 Nm).
    4.  
    5. On 2001-2005 automatic transaxles, tighten the drive plate bolts to 72 ft. lbs. (98 Nm).
    6.  
    7. On 2001-2005 manual transaxles, tighten the flywheel bolts to 96 ft. lbs. (130 Nm).
    8.  

  2.  

 
label.common.footer.alt.autozoneLogo