Toyota RAV4 2000-05

2.4L Engine

Print

  1. Disconnect the wire at the fuel pump.
  2.  
  3. Start the engine and run it until it shuts off.
  4.  
  5. Place a catch-pan under the joint to be disconnected. A large quantity of fuel may be released when the joint is opened.
  6.  
  7. Disconnect the high pressure fuel line.
  8.  
  9. After connecting fuel lines, reconnect the wire and start the engine.
  10.  
  11. Check for leaks and repair as needed.
  12.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the wire at the fuel pump.
  4.  
  5. Start the engine and run it until it shuts off.
  6.  
  7. Disconnect the negative battery cable.
  8.  
  9. Place a catch-pan under the joint to be disconnected. A large quantity of fuel may be released when the joint is opened.
  10.  
  11. Disconnect the high pressure fuel line.
  12.  
  13. After connecting fuel lines, reconnect the wire and start the engine.
  14.  
  15. Check for leaks and repair as needed.
  16.  

 
label.common.footer.alt.autozoneLogo