Toyota Sienna 2000-06

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Drain and recycle the engine coolant.
  4.  
  5. Disconnect the sensor connector.
  6.  
  7. Remove the sensor using a deep 19 mm socket.
  8.  

To install:

  1. Install the sensor with a new gasket.
  2.  
  3. Tighten the sensor to 14 ft. lbs. (20 Nm).
  4.  
  5. Attach the electrical connector and replenish the cooling system.
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Start the vehicle and check for leaks
  10.  

 
label.common.footer.alt.autozoneLogo