Toyota Sienna 2000-06

Oil Pressure Sensor

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the sensor connector.
  4.  
  5. Remove the sensor using a deep socket.
  6.  

To install:

  1. Apply a thread locking compound such as Loctite® 242 to 2 or 3 threads of the sensor.
  2.  
  3. Install the sensor and tighten to 9 f. lbs. (13 Nm).
  4.  
  5. Attach the electrical connector .
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Start the vehicle and check for leaks
  10.  

 
label.common.footer.alt.autozoneLogo