Toyota Sienna 2000-06

Removal & Installation

Print

2000-03



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the lower finish panel.
  6.  
  7. Remove the No.1 safety pad insert.
  8.  
  9. Remove the cluster panel.
  10.  
  11. Remove the center cluster finish panel.
  12.  
  13. Remove the radio.
  14.  
  15. Disconnect the wire harness clamp.
  16.  
  17. Unplug the connector.
  18.  
  19. Remove the screws and the servometer.
  20.  

To install:

Click image to see an enlarged view

Fig. Front air mix servometer mounting-2000-03 Sienna

  1. Install the servometer and tighten the screws.
  2.  
  3. Attach the connector and wire harness clamp.
  4.  
  5. Install the radio, finish panel and cluster panel.
  6.  
  7. Install the pad insert and lower finish panel.
  8.  
  9. Connect the battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo