Toyota Sienna 2000-06

Lower Control Arms

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the wheel.
  4.  
  5. Remove the lower control arm the lower ball joint.
  6.  
  7. Remove the bolts on the front side and the bolt and nut on the rear side of the control arm.
  8.  
  9. Remove the control arm.

    Click image to see an enlarged view

    Fig. Lower control arm-2000-03 Sienna

  10.  

To install:

  1. Place the control arm in position and had tighten the bolts and nuts.
  2.  
  3. Tighten the bolt and nut on the rear side of the control arm to 152 ft. lbs. (206 Nm).
  4.  
  5. Tighten the bolts on the front side of the control arm to 152 ft. lbs. (206 Nm).
  6.  
  7. Attach the lower control arm to the ball joint and tighten to 94 ft. lbs. (127 Nm).
  8.  
  9. Install the wheels and tighten to 77 ft. lbs. (104 Nm).
  10.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the engine and transaxle assembly.
  4.  
  5. Remove the nuts and the transverse engine mount.
  6.  
  7. Remove the two bolts on the front of the lower arm. Remove the nut and bolt, then remove the arm.
  8.  

To install:

  1. Install the arm assembly, install the nut and bolt and tighten to 152 ft. lbs. (206 Nm).
  2.  
  3. Install the two front side bolts and tighten to 148 ft. lbs. (200 Nm).
  4.  
  5. Install the engine mount and tighten the nuts to 64 ft. lbs. (87 Nm).
  6.  
  7. Install the engine and transaxle assembly.

    Click image to see an enlarged view

    Fig. Lower control arm and related components-2004-06 Sienna

  8.  

 
label.common.footer.alt.autozoneLogo