Toyota Sienna 2000-06

Ignition Lock Cylinder

Print

Removal & Installation



2000-03
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable and wait AT LEAST 90 seconds before beginning the procedure.
  4.  
  5. Remove the steering column covers.
  6.  
  7. Place the key in the ACC position.
  8.  
  9. Push down on the stop pin and remove the cylinder.
  10.  

To install:

Click image to see an enlarged view

Fig. Removing the ignition lock cylinder-Sienna

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo