Toyota Sienna 2000-06

Brake Caliper

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear disc brake components

  1. Remove the wheel.
  2.  
  3. Disconnect and plug the brake line.
  4.  
  5. Remove the brake hose.
  6.  
  7. Hold the slide pin and remove the 2 caliper mounting bolts. Lift off the caliper.
  8.  
  9. Installation is the reverse of removal. Refill the system and bleed the brakes. Torque the mounting bolts to 25 ft. lbs. (34 Nm). Torque the brake hose-to-caliper to 17 ft. lbs. (23 Nm). Torque the steel brake line to 11 ft. lbs. (15 Nm).
  10.  



Click image to see an enlarged view

Fig. Rear disc brake components

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the wheel.
  4.  
  5. Disconnect and plug the brake line.
  6.  
  7. Remove the brake hose.
  8.  
  9. Hold the slide pin and remove the 2 caliper mounting bolts. Lift off the caliper.
  10.  
  11. Installation is the reverse of removal. Refill the system and bleed the brakes. Torque the mounting bolts to 25 ft. lbs. (34 Nm). Torque the brake hose-to-caliper to 17 ft. lbs. (23 Nm). Torque the steel brake line to 11 ft. lbs. (15 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo