Toyota Sienna 2000-06

Rear Window Wiper/Washer System

Print

Wiper Motor



Removal & Installation
2000-03


Click image to see an enlarged view

Fig. Exploded view of the rear door assembly-2000-03 Sienna

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Using a suitable pry tool, remove the rear door assist grip, unfasten the screws and remove the grip.
  4.  
  5. Remove the back door pull strap cover using a suitable pry tool, remove the screw and strap.
  6.  
  7. Using a suitable pry tool, remove the center garnish.
  8.  
  9. Using a suitable pry tool, remove the rear door trim panel.
  10.  
  11. Remove the rear wiper arm nut and the arm.
  12.  
  13. Remove the rear wiper motor bolts, unfasten the 2 bolts and remove the rear wiper motor and link assembly.
  14.  

To install:

  1. Install the wiper motor and link assembly. Tighten the bolts to 48 in. lbs. (5 Nm).
  2.  
  3. Install the door trim panel and remaining components in the reverse order of removal.
  4.  

2004-06


Click image to see an enlarged view

Fig. Exploded view of the rear door assembly-2004-06 Sienna

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the rear wiper arm nut and the arm.
  4.  
  5. Remove the back door center and left hand garnish.
  6.  
  7. Remove the back door rod.
  8.  
  9. Remove the back door pull strap cover using a suitable pry tool, remove the screw and strap.
  10.  
  11. remove the back door trim panel.
  12.  
  13. Remove the rear wiper motor bolts, unfasten the 2 bolts and remove the rear wiper motor and link assembly.
  14.  

To install:

  1. Install the wiper motor and link assembly. Tighten the bolts to 49 in. lbs. (5 Nm).
  2.  
  3. Install the door trim panel and remaining components in the reverse order of removal.
  4.  

 
label.common.footer.alt.autozoneLogo