Toyota Tercel 1984-1994 Repair Guide

Actuator

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Label and disconnect the vacuum hoses, then unplug the electrical connector.
  4.  
  5. Disconnect the cable from the actuator linkage.
  6.  
  7. Remove the actuator bracket attaching bolts/nuts, then remove the actuator assembly from the vehicle.
  8.  
  9. Installation is the reverse of removal. Check and adjust the cable free-play.
  10.  

ADJUSTMENT



  1. Check that the cable free-play (slack) is less than 0.39 in. (10 mm).
  2.  
  3. If necessary, loosen the cable lock-nuts, then adjust for proper free-play.
  4.  

 
label.common.footer.alt.autozoneLogo