Toyota Tercel 1984-1994 Repair Guide

Sending Unit

Print

REMOVAL & INSTALLATION



Except 1991-1994 Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fuel tank assembly from the vehicle.
  4.  
  5. Remove the sending unit attaching screws, then pull the assembly out from the tank.
  6.  
  7. Installation is the reverse of removal. Always use new gaskets.
  8.  

1991-1994 Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fuel pump/sending unit assembly from the vehicle. Refer to the electric fuel pump procedure in this section.
  4.  
  5. Remove the fuel cut-off valve from the bracket assembly.
  6.  
  7. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  8.  
  9. Remove the sending unit attaching screws, then remove the unit from the bracket.
  10.  
  11. Installation is the reverse of removal. Always use new gaskets.
  12.  

 
label.common.footer.alt.autozoneLogo