Toyota Tercel 1984-1994 Repair Guide

Water Control Valve

Print

REMOVAL & INSTALLATION



See Figure 1

Not all models use water control valves.

The water control valve is usually located in the engine compartment, connected in-line with the heater core inlet hose.

  1. Disconnect the negative battery cable.
  2.  
  3. Drain the cooling system.
  4.  
  5. Disconnect the control cable from the valve.
  6.  
  7. Remove the hose clamps, then remove the water valve from the hose.
  8.  
  9. Installation is the reverse of removal. Adjust the cable.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: A common water control valve found on some models

 
label.common.footer.alt.autozoneLogo