The sway bar can be found on 4WD models.
REMOVAL & INSTALLATION
See Figures 1 and 2
The suspension on any vehicle is assembled with high grade, hardened fasteners. NEVER substitute a fastener of inferior load rating when assembling a suspension component!
- Remove the sway bar bushing brackets.
- Remove the bolts/nuts holding both ends of the sway bar, then remove the bar.
- Assemble the ends of the bar to the body links. Torque to 22 ft. lbs. (30 Nm).
- Install the sway bar bushing brackets. Torque to 27 ft. lbs. (37 Nm).