Toyota Tundra 2001-06

3.4L V6 - Std 2

Print

Trouble Code: P0420



Catalyst Efficiency Below Normal (Bank 1)

Possible Causes:



Air leaks at the exhaust manifold or in the exhaust pipes
 
Catalytic converter is damaged, contaminated or has failed
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 
Front HO2S or the rear HO2S is loose in its mounting hole
 
Front HO2S is older (aged) than the rear HO2S (HO2S is lazy)
 

Trouble Code: P0440



EVAP Control System Large Leak (0.080") Detected

Possible Causes:



Charcoal canister is clogged, loaded with fuel or with moisture
 
Fuel filler cap missing, loose (not tightened) or the wrong part
 
Fuel tank over-fill check valve cracked or damaged
 
Fuel tank seal leaking, fuel tank cracked or damaged/leaking
 
Fuel vapor hoses/tubes blocked or restricted, or fuel vapor control valve tube or fuel vapor vent valve assembly blocked
 
Vacuum hose or tubing cracked, damaged or disconnected
 
Vapor Pressure sensor incorrectly instAlled
 
PCM has failed
 

Trouble Code: P0441



EVAP System Incorrect Purge Flow Detected

Possible Causes:



Charcoal canister is clogged, loaded with fuel or with moisture
 
Fuel tank over-fill check valve cracked or damaged
 
Fuel tank seal leaking, fuel tank cracked or damaged/leaking
 
Fuel vapor hoses/tubes blocked or restricted, or fuel vapor control valve tube or fuel vapor vent valve assembly blocked
 
Vacuum hose or tubing cracked, damaged or disconnected
 
Vapor pressure sensor is damaged or has failed
 
VSV circuit for the canister purge, VSV for the CCV or the VSV for the pressure switching valve is open or shorted to ground
 
VSV for the vapor pressure sensor circuit is open or shorted to ground, or the vapor pressure sensor is damaged or has failed
 

Trouble Code: P0442



EVAP System SmAll Leak (0.040") Detected

Possible Causes:



Canister Purge valve is damaged, leaking or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Fuel tank is cracked (leaking), or a leak exists in the 'O' ring
 
Fuel tank pressure sensor is damaged or has failed
 
Fuel vapor line(s), fuel pipes or hoses damaged or leaking
 
PCM has failed
 

Trouble Code: P0450



EVAP Vapor Pressure Sensor Circuit Malfunction

Possible Causes:



Vapor pressure sensor signal circuit open or shorted to ground
 
Vapor pressure sensor ground circuit is open
 
Vapor pressure sensor power circuit is open
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0451



EVAP Vapor Pressure Sensor Range/Performance

Possible Causes:



Vapor pressure sensor vacuum hoses loose or damaged
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0452



EVAP Vapor Pressure Sensor Circuit Low Input

Possible Causes:



Vapor pressure sensor connector is damaged or open
 
Vapor pressure sensor circuit is open
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



EVAP Vapor Pressure Sensor Circuit High Input

Possible Causes:



Vapor pressure sensor connector is damaged or shorted
 
Vapor pressure sensor circuit is shorted to VREF
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0456



EVAP System Very SmAll Leak (0.020") Detected

Possible Causes:



Canister Purge valve is damaged, leaking or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Fuel tank is cracked (leaking), or a leak exists in the 'O' ring
 
Fuel tank pressure sensor is damaged or has failed
 
Fuel tank overfill check valve is cracked or is damaged
 
Fuel vapor line(s), fuel pipes or hoses damaged or leaking
 
PCM has failed
 

Trouble Code: P0500



Vehicle Speed Sensor Circuit Malfunction

Possible Causes:



VSS signal circuit is open between the meter and the PCM
 
VSS signal circuit shorted to ground or to VREF or power (B+)
 
Combination Meter is damaged or has failed
 
PCM has failed
 

Trouble Code: P0503



Vehicle Speed Sensor 'A' Signal Erratic Or Intermittent

Possible Causes:



ABS ECU is damaged or has failed
 
Combination Meter is damaged or has failed
 
VSS signal circuit is open between the meter and the PCM
 
VSS signal circuit shorted to ground between meter and PCM
 

Trouble Code: P0504



Brake Switch 'A' To 'B' Correlation Malfunction

Possible Causes:



Stoplight switch signal circuit is shorted to power
 
Stoplight switch assembly is damaged or shorted
 
PCM has failed
 

Trouble Code: P0505



Idle Control System Malfunction

Possible Causes:



RSC/RSO connector is damaged, open or shorted
 
RSC or RSO control circuit is open, shorted to ground or power
 
RSO or RSO power circuit is open (test power from EFI relay)
 
IAC valve is contaminated
 

Trouble Code: P0560



System Voltage (Backup Power Circuit) Malfunction

Possible Causes:



Battery backup circuit is open between battery and the PCM
 
PCM has failed
 

Trouble Code: P0604



PCM Internal Control Module Random Access Memory Processing Error

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0606



ECM/PCM Processing Error

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0607



Control Module Performance

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0617



Starter Relay Circuit High Input

Possible Causes:



Park/Neutral switch assembly is damaged or it has failed* Ignition switch is damaged or has failed
 
PCM has failed
 

Trouble Code: P0657



PCM Actuator Supply Voltage Circuit Malfunction

Possible Causes:



Actuator supply voltage circuit is open
 
Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P1130



A/F Sensor-11 (Bank 1 Sensor 1) Circuit Malfunction

Possible Causes:



A/FS signal circuit or ground circuit is open (intermittent fault)
 
A/FS is contaminated, damaged or has failed
 
PCM has failed
 

Trouble Code: P1133



A/F Sensor-11 (Bank 1 Sensor 1) Slow Response

Possible Causes:



A/F sensor signal circuit or ground circuit is open
 
A/F sensor power circuit is open
 
A/F sensor is contaminated, damaged or has failed
 
Intake air leaks, exhaust manifold leaks or PCV system leaks
 
MAF sensor out of calibration (it may be dirty or contaminated)
 
PCM has failed
 

Trouble Code: P1135



A/F Sensor-11 (Bank 1 Sensor 1) Heater Circuit Malfunction

Possible Causes:



A/F sensor heater circuit or ground circuit is open
 
A/F sensor heater power circuit is open
 
A/F sensor heater is damaged or has failed
 
PCM has failed
 

Trouble Code: P1150



A/F Sensor-21 (Bank 2 Sensor 1) Circuit Malfunction

Possible Causes:



A/FS signal circuit or ground circuit is open (intermittent fault)
 
A/FS power circuit is open (an intermittent fault)
 
A/FS is contaminated, damaged or has failed
 
PCM has failed
 

Trouble Code: P1153



A/F Sensor-21 (Bank 2 Sensor 1) Slow Response

Possible Causes:



A/F sensor signal circuit or ground circuit is open
 
A/F sensor power circuit is open
 
A/F sensor is contaminated, damaged or has failed
 
Intake air leaks, exhaust manifold leaks or PCV system leaks
 
MAF sensor out of calibration (it may be dirty or contaminated)
 

Trouble Code: P1155



A/F Sensor-21 (Bank 2 Sensor 1) Heater Circuit Malfunction

Possible Causes:



A/F sensor heater circuit or ground circuit is open
 
A/F sensor heater power circuit is open
 
A/F sensor heater is damaged or has failed
 
PCM has failed
 

Trouble Code: P1300



Igniter No. 1 Circuit Malfunction

Possible Causes:



IGT or IGF signal circuit is open or shorted to ground
 
Igniter is damaged or has failed
 
PCM has failed
 

Trouble Code: P1305



Igniter No. 2 Circuit Malfunction

Possible Causes:



IGT or IGF signal circuit is open or shorted to ground
 
Igniter is damaged or has failed
 
PCM has failed
 

Trouble Code: P1310



Igniter No. 3 Circuit Malfunction

Possible Causes:



IGT or IGF signal circuit is open or shorted to ground
 
Igniter is damaged or has failed
 

Trouble Code: P1315



Igniter No. 4 Circuit Malfunction

Possible Causes:



IGT or IGF signal circuit is open or shorted to ground
 
Igniter is damaged or has failed
 
PCM has failed
 

Trouble Code: P1335



Crankshaft Position Sensor Circuit Malfunction

Possible Causes:



CKP sensor (+) circuit is open or shorted to ground
 
CKP sensor (-) circuit is open or shorted to ground
 
CKP sensor (+), (-) circuit is shorted to VREF or system power
 
CKP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P1500



Starter Signal Circuit Malfunction

Possible Causes:



Engine starter signal circuit is open or shorted to ground
 
Engine starter signal circuit is shorted to system power (B+)
 
Starter has failed
 
PCM has failed
 

Trouble Code: P1520



Stop Light Switch Circuit Malfunction

Possible Causes:



Stop light switch is shorted to ground
 
Stop light switch is damaged or has failed
 
PCM has failed
 

Trouble Code: P1600



PCM Battery Backup Circuit Malfunction

Possible Causes:



Battery backup circuit is open (check EFI fuse and fuse link)
 
Battery terminals are corroded or loose
 
PCM has failed
 

Trouble Code: P1780



Park/Neutral Position Switch Circuit Malfunction

Possible Causes:



P/N switch is shorted to ground or wiring harness is shorted
 
P/N switch is out-of-adjustment, damaged or has failed
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo