Log In
Search suggestions

    My Vehicles

    2007 Lexus LS460 4.6L SFI DOHC 8cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    OPEN 'til 8:00 PM today

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Toyota Tundra 2001-06

    Brake Drums

    Print

    Removal & Installation



    1. Raise and safely support the vehicle.
    2.  
    3. Remove the rear wheel(s).
    4.  
    5. Remove the brake drum from the axle hub. If there is difficulty in removing the drum, insert a suitable tool through the hole in the rear of the backing plate, and hold the automatic adjusting lever away from the adjuster. Using another suitable tool at the same time, reduce the brake shoe adjuster by turning the adjusting wheel.
    6.  


      Click image to see an enlarged view

      Fig. Exploded view of the rear brake drums components-2001-03



      Click image to see an enlarged view

      Fig. Exploded view of the rear brake drums components-2004



      Click image to see an enlarged view

      Fig. Use a brake adjusting tool (brake spoon) and a prytool to adjust the brake shoes through the adjusting hole


    To install:

    1. Install the brake drum and pull the parking brake lever all the way up until a clicking sound can no longer be heard.
    2.  
    3. Verify that the rear wheels will not turn. If the rear wheels turn, adjust the parking brake cable as necessary.
    4.  
    5. Release the parking brake and remove the brake drum. Measure the brake drum inside diameter and diameter of the brake shoes. Check that the difference between the diameters is the correct shoe clearance. Clearance is 0.024 in. (6mm).
    6.  
    7. If the brake shoe clearance is not correct, adjust the brake shoes until the clearance is correct.
    8.  
    9. Install the brake drum, replace the wheel(s), and safely lower the vehicle.
    10.  
    11. Road-test the vehicle for proper brake operation.
    12.  

    1. Before servicing the vehicle, refer to the Precautions Section.
    2.  
    3. Raise and safely support the vehicle.
    4.  
    5. Remove the tire and wheel assembly.
    6.  
    7. Remove the brake drum from the axle hub. If there is difficulty in removing the drum, insert a suitable tool through the hole in the rear of the backing plate, and hold the automatic adjusting lever away from the adjuster. Using another suitable tool at the same time, reduce the brake shoe adjuster by turning the adjusting wheel.
    8.  

    To install:

    1. Install the brake drum and pull the parking brake lever all the way up until a clicking sound can no longer be heard.
    2.  
    3. Verify that the rear wheels will not turn. If the rear wheels turn, adjust the parking brake cable as necessary.
    4.  
    5. Release the parking brake and remove the brake drum. Measure the brake drum inside diameter and diameter of the brake shoes. Replace as required.
    6.  
    7. Install the brake drum, replace the wheel(s), and safely lower the vehicle.
    8.  
    9. Road-test the vehicle for proper brake operation.

      Click image to see an enlarged view

      Fig. Rear brake shoes and related components-2001-2003



      Click image to see an enlarged view

      Fig. Rear brake shoes and related components-2004-2006

    10.  

     
    AutoZone Logo