Toyota Tundra 2001-06

Stabilizer Bar (Sway Bar)

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear stabilizer and related components

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assemblies.
  6.  
  7. On the left side, remove the two nuts and stabilizer bar link.
  8.  
  9. On the right side, remove the two nuts and stabilizer bar link.
  10.  
  11. Remove the four bolts and the stabilizer bar brackets and bushings.
  12.  
  13. Remove the stabilizer bar from the vehicle.
  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Tighten the stabilizer bar and bushing bracket bolts to 21 ft. lbs.
  4.  
  5. Tighten the stabilizer link assembly bolts to 51 ft. lbs
  6.  

 
label.common.footer.alt.autozoneLogo