Tracker 2000-2004

Wheel Speed Sensor Rotors (Toothed Rings)

Print

Removal & Installation



Front
  1. Remove the Front Wheel Hub.
  2.  
  3. Remove the ABS reluctor ring from the wheel hub by prying the ring away from the hub.

    Click image to see an enlarged view

    Fig. Remove the ABS reluctor ring (1) from the wheel hub (2) by prying the ring away from the hub

  4.  

To install:

  1. Using Sensor Ring Installer tool J 39245, press the ABS reluctor ring onto the wheel hub.
  2.  
  3. Install the Front Wheel Hub.
  4.  
  5. Use a suitable scan tool to perform a diagnostic system check-ABS.
  6.  

Rear
  1. Remove the rear axle shaft.
  2.  
  3. Grind a flat spot on the reluctor wheel.
  4.  
  5. Use a hammer and chisel in order to remove the ABS reluctor wheel.

    Click image to see an enlarged view

    Fig. Grind a flat spot on the reluctor wheel (1).



    Click image to see an enlarged view

    Fig. Use a hammer and chisel in order to remove the ABS reluctor wheel (1).

  6.  

To install:

Click image to see an enlarged view

Fig. Install the rear ABS reluctor wheel (2) onto the rear axle shaft (3).

  1. Install the rear ABS reluctor wheel onto the rear axle shaft.
  2.  
  3. Install the axle shaft.
  4.  
  5. Use a suitable scan tool to perform a diagnostic system check-ABS.
  6.  

 
label.common.footer.alt.autozoneLogo