Tracker 2000-2004

Adjustment

Print

Mode Control Cable



  1. Disconnect the mode control cable from the clip and the door at the heater case.
  2.  
  3. Set the mode lever to the VENT position.
  4.  
  5. At the heater case, hold the door lever fully toward the rear end of the vehicle the cable to the clip.
  6.  
  7. Inspect the mode lever for smooth operation.
  8.  
  9. Ensure that the mode lever stops at the correct positions.
  10.  

Temperature Control Cable



  1. Disconnect the temperature control cable from the clip and from the door at the heater case.
  2.  
  3. Set the temperature lever to the coldest position.
  4.  
  5. At the heater case, hold the door lever fully towards the rear end of the vehicle and install the cable to the clip.
  6.  
  7. Inspect the temperature lever for smooth operation.
  8.  
  9. Ensure that the temperature lever stops at the correct positions.
  10.  

Vent Control Cable



  1. Disconnect the fresh/recirculate control cable from the clip and the door at the blower case.
  2.  
  3. Set the fresh/recirculate lever to the RECIRC position.
  4.  
  5. At the blower case, hold the door fully downward and install the cable to the clip.
  6.  
  7. Inspect the fresh/recirc lever for smooth operation.
  8.  
  9. Ensure that the fresh/recirc lever stops at the correct positions.
  10.  

 
label.common.footer.alt.autozoneLogo